Harbor freight 9x20 lathe manual

Harbor Freight 9x20 # Grizzly 9x19 #G Harbor Freight, Grizzly, Enco and others sell variations of a 9x19 or 9x20 Chinese lathe. These lathes probably get more criticism than they deserve. Like the 7x lathes, they have their shortcomings, but if the 7x lathes are too small for your needs, the 9x lathes might be a good choice for you. REBUILDING THE ASIAN 9X20 LATHE Page 5 4. Lubrication Requirements Three types of lubrication are recommended for this lathe, Oil, Grease and Dry Lube. Oil: Typically SAE Gear Oil (yes, the G manual says SAE20, but it has been found that SAE stays longer) is injected into the various oil ports on various parts of the www.doorway.rug: harbor freight. 9 x 20 Metal Lathe 12 x 36 Metal Lathe G Mill Harbor Freight Metal Lathe 9x20 Lathe Improvements. New Harbor Freight QCTP Methods for attaching the quick change toolpost to the 9x20 lathe. Also QA Tumbler Reverse Variable Speed 9 x 20 Adds the ability to cut left hand threads Surplus treadmill dc motor controller.

Steve Bedair's 9 x 20 Lathe Site Gladewater, Texas Harbor Freight 9 x 20 Metal Lathe Welcome to my 9 x 20 Lathe Site!This is my Harbor Freight model # VGA Central Machinery metal lathe. As with most imported machines the 9 x 20 is not out of the create ready but with some cleaning, adjusting, and a few. Re: Opinions on Harbor Freight 9x20 Lathe. Harbor Freight lathes are made in China like every other new lathe a gunsmith can afford. They have mostly interchangeable parts. The hole through the headstock of a 9x20 Chinese lathe will be 3/4" and not the best for bull barrels, but they can be done in the steady rest. ; this product is available from Harbor Freight Tools. 3. Use a hoist or a forklift to lift the Lathe onto the cabinet or workbench. 4. Mount the Spacer Blocks. The Lathe must be completely level, left-to-right and front-to-back, or the Lathe will not mill properly and may become damaged. 5. Mount the dip tray. 6. Thread on the belt.

REBUILDING THE ASIAN 9X20 LATHE Page 5 4. Lubrication Requirements Three types of lubrication are recommended for this lathe, Oil, Grease and Dry Lube. Oil: Typically SAE Gear Oil (yes, the G manual says SAE20, but it has been found that SAE stays longer) is injected into the various oil ports on various parts of the machine. Re: Opinions on Harbor Freight 9x20 Lathe. Harbor Freight lathes are made in China like every other new lathe a gunsmith can afford. They have mostly interchangeable parts. The hole through the headstock of a 9x20 Chinese lathe will be 3/4" and not the best for bull barrels, but they can be done in the steady rest. Harbor Freight 9x20 # Grizzly 9x19 #G Harbor Freight, Grizzly, Enco and others sell variations of a 9x19 or 9x20 Chinese lathe. These lathes probably get more criticism than they deserve. Like the 7x lathes, they have their shortcomings, but if the 7x lathes are too small for your needs, the 9x lathes might be a good choice for you.